-

The Federal Railroad Administration (FRA) submitted to the Federal Register a final rule allowing railroads to use ultrasonic inspection technology, augmented with global positioning system (GPS) technology, to employ continuous rail testing. These updated regulations are expected to improve safety by making it easier for railroads to test rail more frequently and to identify and repair internal rail flaws before conditions degrade safety.

The regulatory reform allows rail testing vehicles to move without stopping along the track, potentially decreasing passenger and freight train delays associated with routine inspections.

Fast-developing technologies challenge regulators to craft and revise regulations that help ensure public safety, while allowing railroads to test and implement innovative inspection methods.

FRA has issued waivers for the past 10 years, allowing larger railroads to develop and utilize this technology, and the updated standards are consistent with the state of the practice.

Between May 2019 and May 2020, there has been a 27% reduction in broken rail-caused train accidents, which is largely attributable to this new technology. Providing all railroads the option of using this technology presents an opportunity to improve the industry’s overall safety record.

The Final Rule on Rail Integrity Amendments & Track Safety Standards focuses more on providing performance-based outcomes, rather than prescribing exactly how companies conduct effective tests. Railroads will be expected to utilize established methods to conduct required rail inspections, but they will also have the flexibility to utilize new technologies and methods as they are proven safe and effective.

Continuous rail testing involves railcars outfitted with ultrasonic and GPS technologies to internally examine rail without stopping. These cars travel along track, collecting detailed imaging and location data. Companies then transmit the information to test monitoring sites where analysts scrutinize the data to identify suspected internal rail defects. Depending on the severity of the potential defect, carriers have between 36 and 84 hours to dispatch teams to the site to inspect the rail. If a suspected defect is verified, FRA regulations require the railroad immediately apply the proper remedial action. In some cases, this means repairing or replacing the defective rail, slowing trains over the defect, or removing the track from service to stop trains until repairs can be made.

Current regulations require ultrasonic rail test vehicles to repeatedly stop and manually inspect to verify indication of defects within four hours. This frequent starting and stopping can require trains operating in the vicinity to travel at slower speeds, often delaying passenger and freight traffic.

Using existing methods, companies are typically able to test about 20 miles of track a day. By contrast, companies employing continuous rail testing are typically able to test 80 to 160 miles of track daily.

FRA estimates that one continuous railcar could replace three to five stop-and-verify test cars. This equates to fewer test cars stopping on tracks, reducing the number of trains that slow to accommodate them. Fewer trains slowing decreases the likelihood of crews exceeding maximum allowable work hours, thus decreasing the expense of unscheduled replacement crews. Ultimately, FRA estimates continuous rail testing could, in 10 years, save the industry $121.9 million.

More frequent data collection will produce new data troves, facilitating more detailed research into how track defects develop and propagate over time and how those issues can be addressed before adversely affecting rail safety.

Originally posted on Metro Magazine

0 Comments