Photo: Getty Images  -

Photo: Getty Images

Fleet is usually among the top 10 corporate capital expenditures and is often the focus of corporate cost-reduction initiatives. When corporate revenues soften, it is management’s fiduciary responsibility to demand expense reductions and limit capital expenditures. Unfortunately, many fleet-related cost-reduction decisions are made for the short-term, with very little consideration of the long-term impact on the total cost of ownership (TCO). More often than not, senior management is more interested in the fiscal, rather than economic, consequences of their fleet-related decisions.

Cost Deferral vs. Cost Elimination

Senior management exerts intense pressure on fleet managers to control and/or reduce vehicle acquisition and operating expenses. A tighter corporate operating environment forces fleet managers to pursue two different types of cost-cutting goals — cost deferral and cost elimination. And, the easiest way to cut fleet costs is to move or defer them to future fiscal years.

There are two categories of business activity in any company — income and expense. The income side includes sales, service, and any other activity charged with producing income for the company.

The expense side includes areas such as administration, operations, and personnel, which are charged with managing the costs of doing business.

If the fleet manager reports up through the cost side of the organization (operations, administration, etc.) there is an even greater urgency to acquire fleet assets and provide fleet services at the lowest cost possible.

Fleet managers must think strategically when developing long-term cost-containment initiatives by focusing on running the fleet more efficiently. Cost reductions should be achieved through operational efficiencies by focusing on soft costs, such as driver downtime and, concurrently, lost revenue. Driver productivity can produce impressive results when quantifying cost savings, particularly in a well-run fleet program where the law of diminishing returns limits the impact of fixed and variable cost savings. Achieving true cost savings involves more than just putting off expenditures in the hope your organization’s fiscal situation will improve in the future — it requires eliminating costs.

Fleet cost-reduction programs typically focus on the asset; however, there’s a limit to how much a fleet manager can modify truck specifications without impacting the fleet mission. You can’t change the fundamental requirements of your business. This necessitates minimum fleet equipment specifications that, as a result, pre-define the expense parameters for your assets from both a fixed and operating cost perspective. In addition, if you acquire vehicle assets that best fulfill your fleet application, then any supplemental cost reduction will only be based on incremental refinements, in essence, chasing pennies to further reduce costs.

If you want to save “dollars” instead of “pennies,” the best way to achieve additional cost reduction is by modifying driver behavior. This is critical but often overlooked, since attention is typically focused on the asset. But think about it: The way employees drive company trucks and vans can improve (or decrease) fuel economy; extend (or decrease) the life of wear items, such as tires, brakes, etc.; decrease (or increase) preventable accidents; and maintain (or degrade) the overall condition of a vehicle, which, ultimately, has a direct influence on resale value.

Another misapplication of cost control resources is that, all too often, managers attempt to control fleet costs on the back-end. The best time to control cost is before it occurs and the way to do this is through establishing policies and procedures that inhibit unnecessary spending and establish the parameters as to how drivers operate and maintain an asset. By establishing fleet policies up-front for expense control and making a concerted effort to ensure these policies are uppermost in the minds of drivers, fleets will reap substantial cost savings. Fleet policy institutionalizes the mechanisms to curb money-wasting behaviors.

A fleet manager needs to use every communication method available: in-person presentations, e-mail, intranet, newsletter, and phone to continuously reinforce fleet vehicle policy. You need to be redundant if you want to increase the likelihood that your drivers are following fleet policy. You need to not only communicate it to them but, more importantly, you need to re-communicate it on a regular basis. When it comes to fleet policy, there is no such thing as being redundant. The secret to increasing driver compliance with fleet policy is just that — redundant communication.

In the final analysis, increased fleet policy compliance will help reduce unnecessary costs. Fleet policy compliance is a crucial part of a company’s overall cost-control strategy. Based on my experience, the best-managed fleets are those whose drivers adhere to a written fleet policy.

Making Better Drivers

Before implementing new fleet initiatives requiring new dollars, make it your No. 1 priority to stop the waste of existing dollars. The most effective way to reduce waste is to increase compliance with fleet policy. Fleet policy must be a powerful component of a company’s overall cost-control strategy.

If we are honest with ourselves, most of us will grudgingly acknowledge that there are wasted dollars in our fleet budgets. The overwhelming majority of fleet managers are good stewards of corporate funds so budgetary waste is not blatant but often comprised of the cumulative impact of hidden inefficiencies. This situation is best exemplified by a quote attributed to Henry Ford that says: “If you watch the pennies, the dollars will take care of themselves.”

The majority of fleet waste occurs because of non-compliance with fleet policy and, conversely, the lack of enforcement of it. It is estimated that, on average, 5-10% of a fleet’s annual budgeted dollars are wasted. The best way to identify waste is to conduct an efficiency audit of your fleet budget.

The best opportunity to modify driver behavior is by training drivers to more efficiently perform their job and operate their vehicles. One popular technique is called eco-driving. Major fleets, such as Wal-Mart, UPS, and FedEx, have implemented eco-driving programs to modify driver behavior. In essence, there are five eco-driving practices. They include:

  • Minimize idling.
  • Gently accelerate.
  • Maintain a steady speed.
  • Ease off the accelerator early before braking.
  • Judiciously use A/C.

For instance, if you change the driving behavior of your employees, you have a direct impact on the amount of fuel consumed. Even small increases in mpg can result in substantial savings when extrapolated across the entire fleet. For example, aggressive driving (such as speeding, rapid acceleration, and braking) can lower fuel economy by 33% at highway speeds and by 5% on city streets. Fleet tests using eco-driving techniques have demonstrated that a single truck, averaging 35,000 miles per year, can reduce fuel consumption by more than 1,200 gallons.

At its most fundamental level, waste involves consuming resources through inefficient or non-essential activities. This is not just waste, but wasteful.

The greatest amount of waste occurs with the fuel budget. If up to 30% of a vehicle’s fuel efficiency is impacted by driver behavior, you need to minimize this inefficient use of corporate assets. In fact, many of these behaviors are in violation of fleet policy. Let’s start with one of the most wasteful of all fleet activities — unnecessary idling. Until the advent of telematics devices, unnecessary idling was not perceived to be a major problem for fleets. But, once engine data was captured by fleets on a large-scale basis via telematics, it quickly became apparent that idling represented a significant “hidden” problem. The amount of unnecessary idling varies by fleet, but some fleets have recorded idling as much as 20% of the time.

Besides unnecessary idling, there are many other ways that fuel dollars are wasted, ranging from inefficient routing to drivers not being price conscious when refueling. But, what about having drivers ensure that tires are properly inflated? Driving on under-inflated tires is not only dangerous but wastes fuel dollars as well. This is the easiest, most cost-effective (and most neglected) way to boost fuel economy. For instance, keeping tires properly inflated increases fuel efficiency by 3%.

What about overloading? While this also may be perceived as strictly a safety issue, overloading is another way fleet dollars are wasted. Overloading shortens a truck’s service life and increases operating expenses. In fact, fleet maintenance surveys consistently show that overloading is the No. 1 cause of unscheduled maintenance for trucks. There’s a direct correlation between vehicle weight and fuel consumption. Every pound of extra weight requires an engine to work harder, increasing fuel consumption. For instance, an extra 100 pounds in vehicle weight can reduce mpg up to 2%. In addition, every pound deleted from curb weight is converted into revenue-generating payload.

Communicating to Management

You may think you manage a well-run fleet, but how does management really know how well you are doing unless you have objective data to prove it? It is important to have an open-book policy and share data with management, internal customers (such as driver supervisors), and suppliers. From the perspective of management, this will validate that you are getting optimum performance from the fleet. This will cultivate the recognition with senior management that you are the in-house expert on all matters dealing with fleet management. But, this isn’t a given; the fleet manager must work at earning the full support of senior management. It is important for management to understand that a competent fleet manager can easily save a company millions of dollars by implementing the right fleet policies and selecting the right suppliers.

The curse to running a well-run fleet is that it sometimes breeds complacency. Veteran fleet managers who have implemented numerous cost-saving initiatives will tell you that savings become more difficult to find — the law of diminishing returns takes hold. They point out that most of the excess cost has already been wrung out of the operation, noting metrics that prove the fleet is running smoothly. Unfortunately, these fleet managers are operating on autopilot and have become too comfortable in their positions. This is the road to complacency, or, at worst, it is the road to stagnation. They reason that things are working just fine — why monkey with a well-tuned fleet operation? When operations are running smoothly, there is inertia to change.

The conventional wisdom is to not change something that isn’t broken. Again, there is some truth to this statement, but ask yourself: “Is your goal to run a well-managed fleet or do you want to run a best-in-class fleet?” Complacency is the enemy of excellence. 

Originally posted on Work Truck Online

About the author
Mike Antich

Mike Antich

Former Editor and Associate Publisher

Mike Antich covered fleet management and remarketing for more than 20 years and was inducted into the Fleet Hall of Fame in 2010 and the Global Fleet of Hal in 2022. He also won the Industry Icon Award, presented jointly by the IARA and NAAA industry associations.

View Bio
0 Comments